With the development of printing technology, screen printing machines are closely related to our lives. There are different industries, large and small enterprises are constantly investing, screen printing machines have become hot printing products, then you know the installation of screen printing machines and Adjustment?

1. Adjustment of parallelism between the three layers of printing plates, guide rails and working platforms

1 The platform and the guide rail should be parallel. If the two are not parallel, the scraper will not touch the platform with a certain pressure, and there will be gaps. Generally, this adjustment will be adjusted before the machine leaves the factory.

2 The screen printing plate and the platform should be parallel, otherwise the mesh distance will be inconsistent, causing the printing pressure and the screen printing plate to become inconsistent. Therefore, the flatness of the frame itself must be maintained.

2. Scraper adjustment

1 Adjusting the parallelism of the platform by the squeegee, adjusting the left and right screw to adjust the height of the ink plate; the middle shaft can adjust the left and right top wires, in fact, the left and right positions of the ink plate are adjusted.

2 The adjustment of the printing pressure is the adjustment of the position of the squeegee.

3 The length of the squeegee can not be adjusted, generally supplied as a kit, each set has several different lengths for users to choose.

3. Network distance adjustment

1 The mesh distance adjustment can be realized by reducing the screen printing plate or raising the platform, and generally adopting the method of raising the platform.

2 screen printing four-corner network table spacing should be consistent, only when there is lifting net compensation action, the network platform is allowed to be larger than before.

4. Scraper speed adjustment

The speed of squeezing is fast, and each action will be fast. If it is slow, each action will be slow.