With the continuous development of society, the perfection of glass printing technology in China, the opportunities for glass screen printing machines to enter the market are also increasing. Glass screen printing machine maintenance and maintenance work is done well, can reduce the failure of glass screen printing machine, improve equipment utilization, and create higher economic benefits. Conversely, high failure rate will lead to increased maintenance and use costs, shortened machine life, investment The value is reduced, and it will increase the downtime and affect production. So how to maintain the glass screen printing machine? The following is a small series for everyone to introduce:

1. The operation of the glass screen printing machine requires a special operator. The use of the operating equipment requires training. After the training is passed, the mechanical equipment can be operated to ensure that the mechanical equipment is not damaged.

2. Control of ink when printing on glass screen printing machine. When printing, it is necessary to control the ink discharge speed, and the screen printer should ensure that the ink can be uniform.

3. Check whether the oil volume in the converter of the glass screen printing machine is sufficient every day. The pressure relief valve should not be pushed to the back end for a long time. If conditions permit, it is better to install a freeze dryer;

4, glass screen printing machine screen printing, printing rate control. The screen printing speed can be artificially controlled. For a fully automatic screen printing machine, it can be set by itself and does not require too many people to operate.

5. When the glass screen printing machine is printed, the printing parts are cleaned. The printing effect of the screen printing machine is not only related to the equipment, but also related to the printing parts. If there is water or dirt in the printing parts, it will cause the ink to not be applied, which will affect the printing, so before printing the items Be sure to clean the printed parts.

6. If the cylinder of the glass screen printing machine moves too fast, rotating the flow control valve in the direction of motion in a clockwise direction slows down its speed. If the movement is too slow, the reverse is true.

7. When printing on the glass screen printing machine, it is not allowed to enter too much water and oil into the air pressure system to avoid cylinder failure and shorten the service life of the cylinder, and to ensure the drying and cleaning of the compressed air;

8. The components of the horizontal sliding seat of the glass screen printing machine and the precision height matching components must be wiped clean and oiled frequently to prevent the precision from being affected by rust.

9. When introducing compressed air, do not place any part of the body in the position where the screen printing machine can move to avoid crushing.

10. When the glass screen printing machine stops working, the main power switch and compressed air source should be turned off; the speed control valve cylinder and the axis of each part should avoid magnetic loss.